DC12V 2*15W Wireless Power Amplifier MP3 Decoder Board Audio USB Car TF Radio FM

Description

Home
Arduino
Module
Sensor
Chips
About Us
Item 1：
DC12V Car TF Card Version 2*15W Power Amplifier MP3 Decoder Board
(with an additional power amplifier, you can
directly connect to the speaker
)
Product introduction:
Bluetooth IC: Jerry AC6926 Bluetooth version is version 5.0
Power: 2*15W, 2 15W speakers can be connected at the same time
Music format: MP3 /WMA / WAV / APE / FLAC lossless format
Radio FM frequency: 87.5-107.5 MHZ
Support function introduction: support MP3 / USB / TF / LINE IN / FM / BLUETOOTH / remote control connection / DC 12V
The main function:
1. Double decoding supports music in MP3/WMA/WAV/FLAC/APE lossless format;
2. Support Bluetooth function, Bluetooth version 5.0;
3. Power amplifier: 2*15W, can connect two 15W speakers at the same time;
4. With digital tube display;
5. Support MMC/SD/MMA and other cards, support USB interface (U disk);
6. Power-off memory function;
7. Support infrared remote control operation at a distance of 5-10 meters;
8. Support external audio source input LINE IN;
9. Support for radio FM, radio frequency band (87.5MHZ－108.0MHZ);
10. Buttons: Four-button multi-directional control, VOL-/ AUTO / VOL+ / MODE;
Key operation details：
1. VOL- button (previous song/volume down): in MP3 state, short press VOL- to last song, long press to decrease volume; in FM state, short press to increase a station number; in Bluetooth Under the function, short press is the previous Bluetooth song, long press is the volume decrease.
2. AUTO button (play/pause): short press AUTO in MP3 state to play/pause; short press in FM state to play/pause, short press to automatically close and save the station; short press in Bluetooth function to play /time out.
3. VOL+ button (next song/volume increase): in MP3 state, short press VOL+ for the next song, long press to increase the volume; in FM state, short press to adjust the station number down; in the Bluetooth function Short press for the next Bluetooth song, long press to decrease the volume.
4. MODE button: switch between USB / TF / FM / audio input / Bluetooth function in turn.
Functions of each interface:
①USB: Connect U disk (maximum support 32GB)
②LED: digital screen display, red
③Infrared receiver module
④TF: Connect TF memory card (maximum support 32GB)
⑤AUX: Audio input interface
⑥VOL-: Short press is to select the previous song; long press is to decrease the volume
⑦PLAY/PAUSE: Short press is to switch between pause and play; long press is to radio FM automatic station
⑧VOL+: Short press is to select the next song; long press is to increase the volume
⑨MODE: USB / TF / FM / AUX / BLUETOOTH sound switch
Package Included:
MP3 decoder board X1
Remote control X1
（No batteries in the package）
Connection line X3
Item 2：
DC12V Car TF Card Version 2*15W Power Amplifier MP3 Decoder Board
NOTE :
We Don't offer battery !!!!
100% brand new and high quality
With audio receiver module,when cell phone and module matching connection,the MP3 or nondestructive APE files via sent to the product of the receiver module to play,which has greatly helped the function of the product and entertainment.This product also be like ordinary MP3 decoder board,play U disk or TF card MP3 files,as well as the radio broadcast.(This product without calling function,with no power amplifier,only connect to an external amplifier can it use)
support signal switch directly.Support USB, TF
support USB/TF/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip.
support USB/TF card switch,PREV,NEXT,fast forward,fast rewind,volume,EQ,play/pause,stop,single repeat,mute,shutdown and direct election.
support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off.
support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song.
Support 32-320 KBPS MP3 songs.
support power off memory function: memory play songs and volume before power off.
Note:
Non-smart phones (android) have to enter the password - 0000
Decoding board play mode instruction：
Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE
Press "MODE" key on the panel or the remote control switch to MODE,the screen shows "BLUE",can open search connection at this time
Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel
Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song
The remote control instruction:
POWER: STANDBY button cannot switch.
MODE: TF card and U disk: switching sequence for USB→TF→FM→AUX;Only U disk: switching sequence for USB→FM→AUX;Only the TF card: switching sequence for TF→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX
PREV: In USB/TFMODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel.
NEXT: In USB/TF MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel.
VOL + : short/long press for music. VOL - : short/long press for music.
REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle.
STOP: In the USB/TF MODE,short press to STOP the music play.
MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+).
EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL
PLAY/PAUSE: In USB/SD MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save.
Specification:
Installation pitch: 92 mm wide
Installation hole: 83 x 20 x 38 mm
Overall dimensions: 107（W） *25（H） * 38（deep）mm
Input voltage：7-12V
Package Included:
1 x Decoding board
1 x The remote control
（
No batteries in the package）
1 x 2P plug wire with power supply reverse connection protection
1 x 3P audio plug thread
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.